– 2 –
INSTALLATION
EXAMINE YOUR OVEN
Unpack the oven, remove all packing material, and examine the oven
for any damage such as dents, broken door latches or cracks in the
door. Notify the dealer immediately if the unit is damaged. DO NOT
install it if the unit is damaged.
REMOVAL OF PROTECTIVE FILM
A protective film is used to prevent scratching of the outer case during
transportation. Peel this film off before installation or use.
ATTACH CAUTION LABEL.
If a caution label is enclosed with your oven, please attach it to the top
of the appliance before using.
EARTHING
IMPORTANT:
FOR PERSONAL SAFETY, THIS APPLIANCE MUST
BE PROPERLY EARTHED.
When an outlet is not earthed, it is personal responsibility and
obligation of the customer to have it replaced with a properly earthed
outlet.
This appliance must be connected to an outlet having a rated current greater than 13 amps. A 13 amp, B.S.
1363 plug and socket is, therefore, not suitable. It is recommended that this unit should be installed by a
professional contractor, as the installation wiring should be in accordance with current IEE regulations and
connected to the circuit with all poles having a disconnection of at least 3 mm.
VOLTAGE AND POWER WARNING
The voltage used must be the same as specified on the microwave
oven. Using a higher voltage than that which is specified is dangerous,
and may result in a fire or other type of accident causing damage.
Do not plug your oven in via an extension cable as this can be
dangerous. It is important to plug the oven directly into a wall socket.
The back of the appliance heats up during use. Do not allow the cord to
be in contact with the back of the appliance or cabinet surface.
CAUTION
The rear panel of model NE-3280 can become hot – take care when
handling.
Important Safety Instructions
