– 21 –
Self Diagnostics Failure Code Explanation
This oven monitors its operation and displays a Failure Code in the Digital Display Window when a problem occurs.
What to do when a failure code appears:
Unplug the oven and wait more than 10 seconds before reconnecting.
If normal operation does not resume, follow the chart below.
CODE
PROBLEM
WHAT TO DO (BELOW)
F01
Temperature of exhaust air too High
1./2./3./4./5.
F33
Defective Thermistor Circuit
1./5.
F44
Defective Control Panel
1./5.
F81–82
Defective Relay Circuit
5./6./7.
F86–87
Defective Relay Circuit
1./5.
U30
Memory cooking has exceeded the maximum time during
double quantity and triple quantity setting.
Check and change the time.
— See page 8, step 5 “Note”.
1. Oven shuts off automatically. Disconnect the power cord from the wall socket.
2. Oven beeps continuously.
3. Oven resets for operation when cool.
4. Move oven to cooler location.
5. If problem persists call service agent.
6. Oven will operate even if failure code appears, just not as designed. Call service agent.
7. Touch Stop/Reset Pad and try again.
Note:
Above Codes shown in the display do not indicate all the possible failures on the unit.
