background image

- 10 -

A. MANUAL HEATING –– 2 or 3 stages heating ––

INSTRUCTION

DIGITAL DISPLAY WINDOW

PAD

Follow steps 1 to 3 on page 9.

1

4

Press Power Level Selector pad three times.

The selected power level will be indicated and 2nd Stage Heating
Indicator “2” will start to blink.

2

1

5

Press Number/Memory pads “1”, “0” and “0”.

The set heating time will appear.

Note:

up to 15 min. on HIGH or MEDIUM power, 30 min. on DEFROST

0

0

1

2

1

6

Press Start pad.

The oven lamp will turn on. The total time for both stages will appear
and start to count down. 1st Stage Heating Indicator “1” and Power
Level Indicator for the first stage heating will start to blink.

2

1

2

1

• After the first stage heating, beep tone will sound. 2nd Heating Stage Indicator “2” and

Power Level Indicator for the second stage heating will start to blink and the remaining
heating time will count down.

• When all time expires, beep tone will sound and heating will stop. The oven lamp will

turn off. “0” will blink until the door is opened. One minute later, cooling fan will stop.

• Open the door and take the food out. The oven lamp will turn on. Digital Display Window

will show the originally set time and power.

• Close the door. The oven lamp will turn off. One minute later, Digital Display Window will

go blank.

2

2

1

Note

: For 3 stages heating, select a power level once again after step 5 and set a heating time.

SPECIAL NOTE: For both single and 2 stages heating

1. While heating, one touch on Stop/Reset pad stops the operation. You can restart it by pressing Start pad or a

second touch on Stop/Reset pad will cancel the selected program.

2. While not heating, one touch on Stop/Reset pad cancels the selected program.

Repeat Feature

• You can repeat the last manually selected heating time by pressing the Start pad 

, If the oven is used within

1 minute.

• After 1 minute of non-use with the door closed, the Repeat Feature will be cancelled. The display goes blank.

Example: To cook food at HIGH power for 2 minutes and at DEFROST power for 1 minute

How to Operate  NE - 2156/NE - 1856/NE - 1856-2/NE - 1456

Summary of Contents for NE-1846

























Reviews: