– 14 –
G. Memory Pad Heating for Double/Triple Quantity Heating
[Make sure the unit is properly programmed. (See page 13.)]
1. Follow Steps 1–3 in “E. Memory Pad Heating”.
2. Touch the Double/Triple Quantity Pad once.
Note: When you want triple quantity heating, touch Double/Triple Quantity Pad
twice.
3. Touch the desired Memory Pad.
[Example]: Memory Pad 5 (Program No. A-5)
4. Touch Start Pad.
Stage indicator blink while heating time count down.
Note: If program lock is activated, heating program starts immediately i.e. there
is no need to touch Start Pad. (See page 15.)
5. When all time has expired, the end of the cycle beep tone will sound. All heating
will stop. The oven lamp will turn off. The time display will blink “0000” until the
door opened.
6. Open the door and remove the food. Close the door.
1 minute later the Digital Display Window will go blank.
Note: To use B or C side Program, touch (A/B/C) Shift Pad before touching
Program Number Pad.
H. +10s/+20s Pad Heating
1. Make sure the oven is plugged into a properly earthed electrical outlet.
2. Open the door.
The oven lamp will turn on. “0” will appear in the Digital Display Window.
Note: While “0” will appear, operation is available. 1 minute after the door is
closed, “0” will disappear.
3. Put the food into suitable container, place it in the center of the oven and then
close the door securely.
The oven lamp will turn off.
4. Touch +10s/+20s Pad once.
A. The oven lamp will turn on.
B. During operation, the indicator appears in order from the left.
C. Heating will start on HIGH power for 10 seconds.
[Example]: Touch +10s/+20s Pad once for 10 seconds.
Touch +10s/+20s Pad twice for 20 seconds.
5. When all the time expires, the end of cycle beep tone will sound. All heating will
stop. The oven lamp will turn off. The time display will blink “0000” until the door
is opened. 1 minute later, cooling fan will stop.
(Continued on next page.)
