Panasonic NCJD40C, Operating Instructions Manual

Page: 14 / 36

60 85 98
Long Boil Cleaning
Dechlorination
h
Temp.
Disconnect the plug, remove the lid, and discharge the water from the discharge position. P. 18
When the water has been heated, dispense about one half through the spout. P. 18
Fill in water to the top level, insert the plug into an outlet, and heat water. P. 14 Ð 16
14
Water heating
Use a different container to fill the pot with water.
Connect the plug.
Heating will start automatically.
1. Open the lid and fill in water.
2. Heat the water.
¥ Do not fill in water directly from a faucet. (The water may
overflow, get into the electric parts, and cause trouble.)
¥ Fill in water to a position from the "Refill" mark to the "Top
level" mark. (When there is too little water, the function for
prevention of empty heating will operate, and when there is too
much water, hot water may spill from the spout.)
¥ When water is heated in a kettle and filled into the jar pot, the
function for prevention of empty heating may operate.
¥ The temperature indication.
Increases in steps of 5¡C.
Refill mark
Lit
Top level mark
At the time of first use
Heat water once and wash the inner container and the water passages.
Install the charcoal filter on the inner container. P. 13
Caution:
Note:
1
2
15 – 17
19
19 19
19
15 – 17