FURTHER INFORMATION
Room temperature: about 5
℃
～
35
℃
(dew-point temperature: 2
℃ or above
)
Conditions for nanoe
TM
X
generation.
Relative humidity: about 30%
～
85%
nanoe
TM
X is generated by using the air in the room. Therefore, due to the differences
in temperature and humidity nanoe
TM
X may not be generated stably.
When nanoe
TM
X is generated, small amount of ozone will be released. However, the
amount of ozone generated is far smaller than that of ozone present in a forest, which
is not be harmful to human beings.
About nanoe
TM
X
Comes with the nanoeTM X technology
About nanoe
TM
X
Note: nanoe
TM
and the nanoe
TM
mark are trademarks of Panasonic Corporation.
The so-called nanoe™ X are charged water purification particles
generated by applying high voltage to separate water molecules.
nanoe™ X are particulate ions containing hydroxyl radicals whose amount is
10 times that of nanoe™.
nanoe™ X features: high moisture content, small particles,
high stability, etc.
1. High moisture content (the moisture content is 1,000 times the moisture content of
ordinary anions)
2. Small particles (about 5 nm - 20 nm (nanometers) in size, able to penetrate deep
into the fiber and stratum corneum)
3. High stability (6 times more stable than a common ion, covering a distance of 10 m
or above)
4. More hydroxyl radicals (up to 4,800 billion of radicals are generated per second)
5. Weak acidity (with weak acidity features close to that of hair and skin)
All of the above features have been tested by SGS-CSTC Standards Technical
Services Co., Ltd.
9
If a problem is encountered, please investigate it by going through the following items.
If the problem still persists, be sure to unplug the USB power cord from the main unit.
Please contact the dealer for repair.
Possible situation
TROUBLESHOOTING
Please confirm the following
●
→
The operation
indicator is
blinking.
The circuit fails.
●
→
The operation
indicator goes
dim.
Please use a power supply with the maximum output current
of 1.5 A or above.
Is a power supply with the maximum output current lower than
1.5 A used?
Please contact the dealer for repair.
Be sure to unplug the USB power cord from the main unit.
