Connect the USB power cord to the product.
Slightly press the recess
of the filter with your
finger, and remove the
filter in the direction
shown in the figure.
Insert the USB power
cord into the socket
as shown in the figure.
Push the filter into the main
unit in the direction shown
in the figure until it clicks
into place. (Do not let the
USB power cord get pinched
when installing the filter.)
Remove the filter
Route the wire
along the groove.
Pass the USB power
cord through here.
Protrusions (2 place)
Holes
(2 place)
HOW TO USE
1
2
3
1
PARTS IDENTIFICATION
Front
Back
Control panel
Main unit
Main air outlet
(nanoe
TM
X
emission outlet)
Filter(air inlet)
USB socket for
connecting the product
Control panel
USB power cord
power cord
Plug for connecting
the main unit
Be sure to use the included
USB power cord.
(Otherwise, electric shock or fire
may be caused.)
“Power Off/On” button
Operation
indicator
USB plug
WARNING
6
Ø66
Ø90
83
170
Ø83
Unit: mm
