Panasonic Nanoe EH-PHS9K, Operating Instructions Manual

Page: 16 / 68

16
English
Troubleshooting
Problem Possible cause Action
•
Sparks are generated inside the nanoe™ Outlet.
•
The nanoe™ Outlet emits a noise
(crackling noise).
Dust, styling products, etc. are adhered
to the pin-shaped portion where
nanoe™ is generated.
Clean the nanoe™ Outlet to
remove any adherents.
When the temperature is set to [230], [200],
or [180] it blinks alternately between 230 °C,
200 °C, or 180 °C and 170 °C.
It is on standby mode.
When resuming use, press
the [+] or [-] temperature
setting switches and return
the temperature setting to
230 °C, 200 °C, or 180 °C.
All temperature setting lamps keep blinking.
Please request an inspection or
repair from place of purchase.
It takes time to reach operating temperature.
The time to reach operating temperature
(approximately 100 °C) differs depending
on the area.
100 - 120 V: about 30 seconds
220 - 240 V: about 30 seconds
If the problems still cannot be solved, contact the store where you purchased the unit or a service center authorized by Panasonic for repair.
Specifications
Power source
100 - 120 V
50 - 60 Hz
220 - 240 V
50 - 60 Hz
Power consumption
38 W
The amount of power consumption is determined as the arithmetic mean value of the power input occurring during a
representative period.