Panasonic nanoe EH-NA9K, Operating Instructions Manual

Page: 12 / 32

12
Skin care mode
Since the skin is likely to become dry after bathing, the
moisture content of skin can be improved by blowing hair
with air containing nanoe™ and mineral ions, leaving
your skin moist.
Do the following after drying your hair by Step 4 of
"How to use":
1
Set the power switch to
[
Ⅰ
].
2
Select [COLD] with the mode
switching button.
3
Hold the unit with the air
outlet about 20 cm away
from your chin, and blow your
hair for about 1 minute while
swinging the main body.
During use, keep your eyes
closed.
You can apply lotion,
emulsion or other skin care
appliances for routine care
as usual.
Scalp care mode
Moisture remaining on the surface of the scalp leads to
stickiness or other discomfort.
At a room temperature of 23
℃
, this mode can gently
dry your scalp with warm air of approx. 50
℃
.
Do the following after drying your hair by about 70 %
by Step 3 of "How to use":
1
Select [SCALP] with the
mode switching button.
2
Lift up your hair with your
hand and dry your scalp.
You may feel cold depending
on the ambient temperature.
In this case,switch to the
[HOT] mode, and move the
unit further away from.
3
Select [HOT] with the mode
switching button and dry your
hair thoroughly.
Maintenance
Always turn the power switch off and disconnect the plug
from the household outlet. (except when cleaning the air
outlet).
At least once a month
If dust accumulates and blocks the appliance, the
performance may be degraded and the following
problems may be caused:
Sparks may be seen from the interior when hot air is
used.
These sparks are caused by the action of thermoswitch
as a protective device, and this is not dangerous.
Hot air sometimes switches to cold air.
Hot air becomes abnormally hot.
EH-NA9K 香港向1222.indb 12 2023/1/3 16:34:07