Panasonic nanoe EH-NA9J, Operating Instructions Manual

Page: 17 / 310

17
English
Maintenance of the hair dryer
Always turn the power switch off and disconnect the plug
from the household outlet. (Except when performing
maintenance on the air outlet)
Maintaining the air outlet
Do this about once a month or over
1. Plug into the household outlet.
2. Select [ ], [ ] or [ ] with the power
switch.
3. Select [COLD] with the mode switching
button.
4. While scraping dust and hair jammed in the mesh with a
cotton swab, blow them away with air.
► Notes
• When performing maintenance, do not block the air inlet with
your hand.
• Dust may fl y out when you use the appliance for the fi rst time
after maintenance.
Use the appliance after con
fi rming that dust no longer fl ies out.
(Do not look into the air outlet.)
Maintaining the air inlet
Do this about once a month or over
Wipe to clean lint, hair, or
other matter from the air inlet
with a tissue or toothbrush.
► Note
• Do not press or rub with your
nails or sharp items.
Doing so may cause the air
inlet to break.
If dust is attached to the
inside, remove it with a
vacuum cleaner.
Maintaining the nanoe™ outlet and the
mineral ion outlet
At least once a month
In order to maintain the generation amount of nanoe™ and
mineral ion.
1. Prepare a commercially available
new cotton swab.
2. Gently insert the swab in the
nanoe™ outlet and the mineral
ion outlet until it stops (about
1 cm), and then turn the cotton
swab 2-3 times carefully.
nanoe™ outlet
Mineral ion outlet
► Note
• It is easier to clean the nanoe™ outlet and the mineral ion outlet
with a narrow cotton swab (for example, one intended for babies).
Maintaining the main body
Do this when dirty
To clean the hair dryer (when it is dirty), soak
a cloth in the soapy water and squeeze it out
fi rmly, then wipe with the cloth.
► Notes
• Do not use substances such as alcohol, nail
polish remover or detergent (hand soap).
Doing so may result in malfunction or part
cracks or discoloration.
• Do not leave the appliance with hairdressing
products or cosmetics on it.
Doing so will cause deterioration of the
plastic, leading to discoloration and cracks.
alcohol
polish
remover