◦
Never modify, disassemble, or repair. Doing so may cause ignition or injury due to
abnormal operation. Contact an authorized service center for repair.
◦
Do not store the appliance in a bathroom or location with high humidity. Also, do
not place in a location where water may spill (such as top of a vanity). Doing so
may cause electric shock or fire.
◦
Do not use the appliance with a wet hand. Doing so may cause electric shock or
fire due to a short circuit.
◦
Do not store within the reach of children or infants. Do not let them use it. Doing so
may cause burn, electric shock, or injury.
◦
Do not use a 200-240 V power supply with the voltage selector switch still set at
[100-120 V]. Failure to do so may cause fire or burn.
◦
Do not use for commercial use. Do not place in a location where the appliance is
used by an unspecified number of people. Doing so may cause burn or fire due to
a continuous load or overload.
CAUTION
◦
Do not use with the air inlet damaged. Doing so may cause the hair to become
tangled in the air inlet, resulting in damage to the hair.
◦
Please keep a distance of over 3 cm between the air outlet and your hair. Doing so
may cause burns to the hair.
◦
Be careful about where you point the hair dryer, and be sure to keep your hair at
least 10 cm away from the air inlet. Failure to do so may cause the hair to become
tangled in the air inlet, resulting in damage to the hair.
◦
Do not store the cord in a twisted state. Doing so may cause the wire in the cord to
break with the load, and may cause electric shock or fire due to a short circuit.
◦
Do not drop or subject to shock. Doing so may cause electric shock or ignition.
◦
Only use for drying or styling human hair. (Do not use on pets, or to dry clothing,
shoes, etc.) Failure to do so may cause fire or burn.
◦
Do not use on infants. Do not touch the air outlet and quick-dry nozzle, which will
become very hot. Doing so may cause burn.
◦
Do not look into the air outlet while in use. The hair dryer blows air with dust, etc.
possibly resulting in injury.
◦
When unfolding or folding the handle, do not touch the shaded area as shown in
figures below. Doing so may cause finger injury.
Parts identification
①
nanoe™ outlet
②
Air outlet
③
Main switch
④
nanoe™ lamp
⑤
Air inlet
⑥
Voltage selector switch
⑦
nanoe™ charge panel
⑧
Handle
⑨
Ring for hanging
⑩
Bushing
⑪
Cord
⑫
Plug
⑬
Quick‑dry nozzle
<Accessory>
⑭
C‑2 Plug adaptor
(Continued)
英語翻訳
（
English
）
21
