30
■
■
If “H” and “number” are alternately displayed, check the following.
Inspection is required.
●
●
Turn off the tap just to be safe. Check the displayed content (2-digit number after “H”), pull
out the power plug, and contact your dealer.
※
1: When adjusting the child safety setting, please turn off the machine and restart.
Error Messages
■
■
If the buzzer beeps and "U" and "number" are alternately displayed, check the following. By pressing
[Start], the operation will resume.
●
●
If the problem persists, pull out the opwer plug and contact your dealer for service.
Poor installation
●
●
Are the fixing bolts for packaging at the rear side of the product removed?
→ ■
Press power [off] to stop cycle. Please contact the dealer that you purchased the product
from to remove the fixing bolts.
Water cannot be drained.
●
●
Check the water drain hose, drain filter and drain outlet.
• Do not allow the tip of the hose to face up. • It is frozen.
• The water drain hose or drain outlet is
clogged with lint.
• Do not allow the tip to be soaked in water.
• It is crushed.
• Clean the drain filter if blocked. (P.23)
●
●
If the message is still displayed after checking the above, contact your dealer.
Door lock malfunction.
●
●
If the door is not closed.
→
Close the door.
→
If the door is closed, close the door after once opening the door.
●
●
If the door does not open.
→
Press the centre of the door firmly.
Spin operation cannot be
performed.
●
●
Check the clothes condition.
• Many large items (Towel sheets, Judo uniform, etc.)
→
Reduce such large items.
• Many clothes
→
Detangle the clothes.
• Not many clothes
→
Add one or two bath towels.
●
●
The main unit is installed on an unstable location or inclined floor surface.
●
●
Check the water drain hose and drain outlet. (See the descriptions for “U11”.)
Water cannot be supplied.
Abnormal water supply
●
●
Check the water supply pathway.
• The water faucet is not turned on.
• The water supply filter is clogged with dust. (P. 35)
• Water or water supply hose is frozen.
• The water supply is cut off.
• Is the water supply abnormal? (The water level is too high) When the water levelrs toohigh,
do not open the door, please dram the water first.
When there are too many or
too little clothes, draining
cannot be proceeded.
●
●
The possibility of having too many clothes
→ ■
Please check whether this are too many clothes or if the
clothes are too wet.
→
During Dry, if the clothes are too wet, please select to
spinning individually or remove excessive clothes.
●
●
The possibility of cooling water not able to be discharged
during Dry
→
Press power [off] to stop the Dry cycle and confirm whether
there is abnormal situation occurring basing on the contents
in [U11].
→
After spinning, restart the Dry cycle.
Turn off the power;
reselect the desired
cycle, restart the
operation. If the door is
locked, please release
the [Door lock] first.
(P. 16)
Dry filter not installed
●
●
Is the Dry filter properly installed? (P. 22)
→
After cleaning and maintenance, be sure to install the Dry filter properly. After installation,
restart the operation.
