17
Wash Instruction
Wash+Dry
Wash
※
When Wash+Dry.
※
If there is no need for Dry, do not press the [Dry Mode] button.
※
■
Preparation
(1) Getting laundry ready (P. 10)
●
classification
●
pre-treatment
(2) Turn on the faucet
• You must turn on the faucet even for Dry cycle.
(3) Put the laundry in the drum and close the door.
※
■
When you select
【
Wash+Dry
】
or
【
Dry
】
cycles, the display
when you put in too much
clothes (exceed capacity)
When the clothing exceeds capacity, [U15] message
will appear, and the operation will stop. Remove
excessive clothing then restart.
Reach the upper portion
of the entry for about
8k
g
. Normal.
※
If you put in too
much clothing, the
clothes may not be
completely dry or the
Dry time will become
longer.
※
■
Please refer to P. 9 and select the proper Dry cycle.
※
■
After the Dry is completed, start the [Fluffy]
operation (about 2 hours and the [Fluffy] light will
flash.)
※
Since the Dry is completed, please remove the
clothes soon.
●
To cancel the [Fluffy] after Dry (P. 38)
●
●
Capacity
8 k
g
or less
.
●
●
Normal / Stain
According to the
maximum capacity of
each model (P. 9)
1
Put in the clothing, close the door, and
press the power button.
●
●
When Wash, do not put the clothing over the top
of the entry, or it will likely to cause damage to the
product.
[Normal] display light is on
2
Press [Heated Program] to [Water Warm Up]
Select [Water Warm UP] to [Hygiene] to [Super Soak] to
[Wash]
3
Press [Dry Mode] to (Wash+Dry)
●
●
Select [Normal], [Extra Dry], [Gentle Dry] or
[Timed Dry].
4
Start
5
Put in the detergent (P. 13)
The operation is complete with buzzer.
(Take out the laundry.)
Wash normal
clothing
Normal /
Normal • Stai
4 1
2
3
