background image

6

 Detergent

Putting in detergent

Do not put detergent directly into the tub.

Detergent may remain undissolved.

 

The level of foaming depends on condition such 
as load size, degree of soiling, detergent type, and 
water hardness.

Putting in bleach

 

Do not use whiten bleach (chlorine bleach) for 
coloured clothes to prevent loss of colour.

 

Do not use bleach for the Delicate program.

Putting in softener

 

Softener is automatically released during the 

fi

 nal 

rinse process.

 

To add softener during operation, press “Pause” 

fi

 rst.

 

Up to about 160 ml can be added. To add more 
softener, use the Fragrance program.

 

When using 
concentrated softener, 
dilute it with water before 
putting it in.

NOTE

 

Do not use separated or solidi

fi

 ed softener.

 

Softener cannot be used with the Cotton Eco 
program.

Concentrated 

softener

Water

Put in detergent, bleach and 
softener according to the water 
amount displayed.

 

Follow the instructions on each package.

 

Turn the tub by hand if it is dif

fi

 cult to put in the 

detergent inlet. (P. 10)

 

Attach the detergent inlet cover if it comes off.

 

 Detergent inlet
Detergent/Bleach

 

 Softener case
Softener

 

If the detergent/bleach inlet cover is wet, wipe

it before use. (Wet cover can cause detergent
clumps)

OM_NA-FS95A1.indd   6

OM_NA-FS95A1.indd   6

10/20/2560 BE   10:47 AM

10/20/2560 BE   10:47 AM

Summary of Contents for NA-FS95A1

















Reviews: