14
Installation
(continued)
4. Connect the water supply hose.
1
Attach one end of the water
supply hose to the water
supply valve screw.
1
Hold the elbow and tighten the nut.
2
Check that the elbow is not loose.
●
The procedure for cold water
and hot water is the same.
2
Attach the other end of the
water supply hose (grey) to
the cold water tap, and tighten
the nut clockwise with your
hand.
3
Likewise, attach the other
end of the water supply
hose (white) to the hot
water tap.
4
Turn on the water taps
slowly and make sure there
are no leaks.
.
Water faucet
Water supply hose
CAUTION
●
Do not make wrong
connection for the HOT
and COLD water supply
faucets.
●
Tighten the nut
fi
rmly.
●
Do not twist, squash, modify
or cut the hose.
NOTE
●
If you have an uncontrolled water
heating source (e.g., wet back,
solar heating),
fi
t a tempering
device (e.g., a safe valve).
This will ensure the hot water
temperature remains within safe
limits. Contact a local plumber or
plumbing supply merchant for the
most suitable type of tempering
device.
●
Time for hot water to reach
washing machine will depend on
proximity of washing machine to
hot water tank.
Water supply
valve screw
Nut
Elbow
Water supply
hose
COLD HOT
5. Connect the power plug and grounding wire.
●
Plug the power cord into a dedicated household 3-pin AC outlet rated at 10 A, 220 V to 240 V.
If you are not sure, contact a quali
fi
ed electrician.
6. Check that the washing machine is level.
The bubble should be at
the centre of the mark.
Leveller
Mark
Bubble
■
If the bubble is out of the mark
3
Turn to the right to
tighten.
1
Turn the adjustable leg knob to
the left to loosen.
2
Turn the adjustable
leg to eliminate
wobble.
To lower
To raise
7. Perform a trial operation.
●
Check that there is no water leakage, abnormal sounds or error display.
OM_NA-FS95A1.indd 14
OM_NA-FS95A1.indd 14
10/20/2560 BE 10:47 AM
10/20/2560 BE 10:47 AM
