manualshive.com logo in svg

Panasonic NA-FS80X1, Service Manual

Share
Download
Panasonic NA-FS80X1 Service Manual Download Page 27

- 27 -

8. DISASSEMBLY  •  ASSEMBLY INSTRUCTION

NA-FS80X1 / FS90X1

8.1 Controller Display

It may cause a fire, emitting smoke and electric shock. 

Fireproof

cover

Pressure
connecting
terminal

Pull a 

power 

plug out

●

 To connect the lead wire, use a solderless

 

terminal and tighten it firmly. (Use a specified

 

part, regular bonding pliers)

●

 Install a flame protect cover

 

(incombustibility-proof) to completely cover

 

the connection part and seal an opening

 

part with tape. (Re-use the incombustible

 

cover attached with the product)

●

 Fix lead wires firmly by wire fixing part to

 

prevent contact with revolving part, high

 

temperature part and metal end faces. 

●

 Confirming proper wiring diagram for reparing. 

●

 In case of lead wire disconnection, replace whole lead wire unit.

 

Do not cut a part of lead wire unit and use it.

● 

Please make sure
to pull out a power
plug before
disassembly. It may
cause an electric
shock or injury.

 

● 

Do not remodel
appliances,
instruments and
parts. It may cause 
break down or fire.

● 

Straightly pull out
or insert a faston
terminal. Do not 
twist it. It may cause
damage or fire.

 

 

Warning

Warning

Illustration

Disassembly Procedure

Water proof cover

Panel sheet A

Controller display

● 

Necessary tool plus driver

● 

Replacement of controller display

(1) Take off top cover installation screw (2 pieces) at the back side 
(2) Take off the window cover packing (for each right and left) at front,
 

right and left of top cover. Then take off installation screw

 

(for each right and left) of the top cover. 

● 

Make sure to put a ground
wire on human body 
during replacing part or
trouble diagnosis.

・

It may cause a trouble by

 static 

electricity. 

・

Touch power plug and the

 

ground wire to clear voltage

 difference. 

(3) Lift back side of the top cover and slide it toward you and take it off.
 

(front fix by front hook)

(4) Lean the top cover with a product and a wall. 
(5) Take off a water proof cover
 

installation screw (2 pieces)

 

and disconnect a connector. 

(6) Take off a controller installation
 

screw (5 pieces) and remove

 the 

controller. 

Caution

Summary of Contents for NA-FS80X1










































Reviews:

No comments

Brands by name

Popular brands

Load more brands