- 20 -
6. INSTALLATION
NA-FS80X1 / FS90X1
An Instruction Manual Extract
When replacing from the right side to the left side.
Fixing Method
You can replace position of the interior drainage hose at the rear and the left side depending
on a drainage place. Please do not take off the interior drainage hose of the cock side.
2 In the case of replacing an interior drainage hose.
■
2
1
1
3
2
2
4
4
5
3
4
6
5
7
Take off a screw fixing connecting part of
(a).
Cap
(a)
(a)
(b)
Internal drainage hose
Cock side
※
Do not remove !
Take off back panel.
Fix the connecting part (b) with a screw.
※
Hang top of the connecting part on the
main body surely.
※
You can replace at the rear side according to the procedure mentioned above. (There is no hose hole cap at the rear side)
Fix the unit with a screw and attach a cap
on (a) part.
7 Fix back panel with a screw and attach a
cap on (a) part.
Lift a unit and take it off toward you.
Take off the cap of (b) part and replace an
interior drainage hose from (a) to (b) part.
■
A right below drainage unit sold separately is
necessary, if drainage pipe is under a
washing
machine,
■
The pulling around of the outside drainage
hose.
●
Don't put the tip into water !
●
Raising hose is less than 10cm
!
●
Extention is less than 3m !
●
If the hose is inserted directly into a drainage pipe,
please confirm to fix firmly.
●
If there is a lot of waste thread
at drainage pipe and difficult to
remove, please buy a waste thread
box sold separately.
Right below drainage unit
(sold separately) N-MH1 (back cover)
Please don't put a hose in
a drainage pipe directly.
Because the tank is suspended structure, a drainage hose may
come off or be torn by vibration at the time of the spin.
N-LB1
Less than 10cm
Less than 3m
