background image

2

s

n

o

it

u

a

c

e

r

P

 

y

t

e

f

a

Home hot water heater safety

 

Under certain conditions, hydrogen gas may be 

produced in your hot water heater that has not been 

used for two weeks or more. Hydrogen gas can be 

explosive under these circumstances. To prevent 

the possibility of damage or injury, you should turn 

on all hot water faucets in your home, and let the 

water  flow out for several minutes before connecting

 

to your washing machine. This will allow any built-

up hydrogen gas to escape. Since hydrogen gas is 

 flammable, do not smoke or use an open flame or 

start appliance during this process.

Never do the following about the 

power plug and cord

(To prevent fire or electric shock) 

 

Do not plug in or unplug the power cord with wet 

hands.

 

Do not hold or pull on the cord when removing the 

plug from the socket.

 

Do not use a power cord or plug that is damaged. 

If the power cord is damaged, it must be replaced 

by the manufacturer, its service agent or similarly 

qualifi ed persons in order to avoid a hazard.

Observe the following about the 

power plug and cord

(To prevent  fire or electric shock)

 

Use a socket that satisfies the rating requirement 

solely for this appliance. Do not use a plug adaptor 

or extension cord.

 

Always fully insert the power plug into the socket.

 

Wipe the power plug periodically with a dry cloth. 

(Accumulated dust collects moisture, which may 

cause insulation failure, resulting in fire.) 

 

Unplug the power cord before cleaning.

Never disassemble, repair or modify 

the appliance yourself.

 

In case of malfunction or failure, immediately stop 

use, unplug the power cord, and ask your nearest 

service centre for repair.

Do not allow children to use on their 

own.

 

This appliance is not intended for use by persons 

(including children) with reduced physical, sensory 

or mental capabilities, or lack of experience and 

knowledge, unless they have been given supervision 

or instruction concerning use of the appliance by a 

person responsible for their safety.

 

Children should be supervised to ensure that they 

do not play with the appliance.

 .

e

ri

f  

m

o

r

y

a

w

a

 

p

e

e

K

 r

o

 

s

l

a

ir

e

t

a

m

 

e

l

b

a

m

m

a

lf

  t

u

p

 t

o

n

 

o

D

clothes with such things attached in 

the tub. Keep them away from the 

appliance.

(To prevent explosion or  fire)

 

For example: Kerosene, gasoline, benzine/thinner, 

alcohol, etc.

Do not touch the tub until it 

completely stops.

(To prevent injury)

 

If the tub does not stop within 15 seconds when 

the lid is opened during spin process, switch off the 

appliance immediately and call a service person.

Be sure to provide a ground.

(To prevent electric shock if electricity leakage occurs.)

 

To establish a ground, ask a service person to do 

the grounding work.

May cause serious injury or death. 

 WARNING

Read and follow these safety precautions.

Summary of Contents for NA-F85G2

















Reviews: