background image

10

 Maintenance

 Convenient Functions

Cancelling end buzzer and 

button operation sound

1

 Pressing down, 

 press.

Then hold on for 
3 seconds. 

2 short 

beeps

 

To reset, do the same procedure. 

4 short 

beeps

 Setting Child Lock

To prevent children from falling into the tub and 

drowning, if the lid is opened while the washing 

machine is operating, this function sounds a buzzer 

until it is closed. Not closing it within 10 seconds 

fl

 ushes the water out.

 

This function does not lock the lid and button 

operations.

 

When water is drained forcibly, “U 99” is displayed. (P. 16)

1

After closing the lid

Turn the power on.

2

Press and hold for 
5 seconds. 

2 short 

beeps

 

 

To cancel, do the same procedure. 

4 short 

beeps

 Turning the tub by hand

If it is dif

fi

 cult to reach the detergent inlet.

1

Turn the power on.

2

When a clicking sound is heard

Turn the tub 
within 20 
seconds.

(Clockwise only)

NOTE

 

If there is water in the tub, the tub cannot be turned.

 Lint 

fi

 lter

After each operation

Lint 

fi

 lter

1

Remove the

fi

 lter gently.

2

Open the 

fi

 lter 

and remove 
lint.

 

If lint is dif

fi

 cult to 

remove, soak and 
wash the 

fi

 lter in 

water.

3

Attach the 

fi

 lter in its original 

position.

1

2

3

4

Click

NOTE

 

Do not wash laundry without the 

fi

 lter.

(To prevent damage to clothes)

 

Turn the tub by hand if it is dif

fi

 cult to remove the 

fi

 lter.

 

If the 

fi

 lter is broken, purchase a new one at your 

local dealer.

Summary of Contents for NA-F85G2

















Reviews: