background image

4

Program 

selection 

(P. 5)

 Operation Panel

Power Off/On

Air Dry 
(P. 9)

Child Lock lamp 

(P. 10)

Change water 

amount

During the wash 

process, press “Water 

Level” to change the 

water amount.

 

Some water amounts 

cannot be selected 

depending on the 

program.

 

When the remaining 

time is displayed, 

press “Water Level” 

to check the water 

amount.

Water level/water amounts 

Level

High
10-8

Mid

7-5

Low

4-2

Extra 

Low

1

Model

Detergent *

 

 

Water 

amount (L)

99 88 81 74 66 59 52 46 38

33

NA-F95A1

93 88 81 74 66 59 52 46 38

33

NA-F85A1

 : 1 scoop of detergent

 

Each water level, except “Extra Low”, has 
three water amount options that can be 
switched while the level is lit by pressing 
“Water Level”.

Water amount/remaining time

After starting operation, indicates 

the water amount according to the 

amount of laundry.

After approx. 5 seconds, indicates the 

approximate remaining time (min).

NOTE

 

In case of a power failure during operation, operation will resume from the point where it was stopped when the 
power is recovered (Auto Restart).

 

The power turns off automatically if you do not press “Start/Pause” within 10 minutes after power-on.

Change process 

settings

Change the combination 
of wash, rinse and spin 
processes, and the time 
length or number of times 
for individual processes. 
(P. 9)

Flashing (in progress)

Lighted

 

After starting operation, 
you can change settings 
only during wash 
process by pressing 
“Start/Pause”.

e.g.) 8 hours later

 

Setting range: 2 - 24 

hours later, in one-hour 

increments. (3 - 24 hours 

later for the Soak program 

and 4 - 24 hours later for 

the Cotton Eco program)

 

Not available for the 

following programs:

Delicate, Fragrance, 

Bedding, Tub Hygiene, 

Air Dry

Preset

Set the time to 

fi

 nish washing 

(in hours). (  lights.)

Temp Setting

For washing, cold water can be mixed 

with hot water. Press the button to select 

Hot/Warm/Cold. (P. 7)

Do not use water hotter than 60 ºC.

 

●  

The estimated water temperature in 

the tub during wash process (when 

hot water is 50 ºC, and normal water 

is 20 ºC):

Hot

approx. 40 ºC

Warm

approx. 30 ºC

 

●  

Lamp indications
Lighted: Hot/Warm/Cold is set.

Flashing: Hot water is being supplied.

Start/Pause

OM_NA-F95A1,F85A1.indd   4

OM_NA-F95A1,F85A1.indd   4

11/14/2560 BE   2:57 PM

11/14/2560 BE   2:57 PM

Summary of Contents for NA-F85A1

















Reviews: