background image

17

Please observe the following Instructions

shut off

After finishing don’t forget:-

•   Please shut off the 

faucet.

•   Please don’t let water 

store for a long time.

-

This is to prevent water 
soaking.

Do not put any type of charger stand 
on the washing machine.

•  

When you place the 
charger stand for an 
electric toothbrush, etc., 
close to the washing 
machine, malfunction 
will result.

When you will not use the washing 
machine for a long period of time.

•  

Turn off the power and pull out the 
power plug.

Do not use a cover made of vinyl chloride. 
(It could damage the plastic or paint.)

•  

If you intend to use such a 
cover, first place a cloth over 
the washing machine to keep 
it from coming in contact with 
the cover.

Do not put in too much detergent.

•  

Rinsing cannot be 
done sufficiently.

•   The floor could be wet 

by the foam flowing 
out of the machine.

Keep condensation from getting on the 
floor.

•  

When the air temperature is 
high and the water temperature 
is low, condensation will 
sometimes run off onto the 
floor.

Do not put too much laundry.

•   Put laundry completely 

into the tub. Never 
allow the laundry to 
protrude out of the tub. 

(This causes torn 
laundry or damage to 
the plastic parts.)

Do not hold magnets or cards with 
magnetic strips near the washing 
machine.

•  

Do not hold cards with magnetic strips near 
the washing machine. (The cards may become 
unusable.)

•   Do not hold a magnet near 

the washing machine while it 
is in operation. 

 

(The tub may stop spinning.)

If the spinner tub does not stop within 
15 seconds after you open the lid 
during spinning, immediately stop 
using the machine, and contact your 
dealer for repair.

Do not spray anything or pour water 
over the lid.

•   Do not put water, pesticides, 

hair products, deodorants, or 
any other such liquids on the 
lid. (To avoid electric shock and 
malfunctions)

Caution

1.  It is advisable not to start the machine direct with spinning process but 

to start with Normal washing cycle.

2.  Please be aware, when the laundry is unbalanced during spinning, 

some knocking sound may occur and the spin may stop followed by an 
additional automatic rinsing.

3. If the unbalance condition continue for 3 times, the washing machine 

will stop functioning automatically.

4.  You can manually distribute the laundry evenly to ensure the laundry 

are balanced inside the tub.

Cautions on parts

If the supply power cord is damaged. It must be replaced by Service Center or a similarly qualified person in 
order to avoid a hazard.

Even Laundry

Uneven Laundry

NA-F70HR2_EN.indd   17

2/28/12   1:26:36 PM

Summary of Contents for NA-F70HR2

























Reviews: