15
Choosing Your Own Laundry Setting
You can select PROGRAM to wash your own laundry according to your preferences.
1
3
2
This is the course to prevent fungus growth at the washing and spinning tub using the “Chlorine system
bleach for clothing use”, available in most markets, to keep the tub clean.
-
Do not use the oxygen system bleach or chlorine
system bleach for kitchen use.
(Too much lather may overflow.)
• Frequency for care : Once a month
• Operation will be continued for 2 and a half hours.
1
Press the [Power On/Off] button.
2
Press the [Program] button 5 times for
selecting “Tub Hygiene” Course.
• The [Tub Hygiene] light will be indicated.
3
Press the [Start/Pause] button.
4
When filled up with water, press the [Start/Pause] button, and pour about a cup of
chlorine system bleach for clothing use directly into the washing and spinning tub.
(Approx. 200ml per 50L of water.)
5
Close the lid, and press the
[Start/Pause] button.
-
Do not operate while clothing is in the washing tub.
-
Cancel the “Child Lock” when it is active. Refer to
page 14.
Operation will be finished in 2 and a half hours.
[NOTE]
• Fungus growth at the washing and
spinning tub varies depending on
ambient conditions.
WASH
To reuse the wash water.
• After washing, the wash water is left in the tub and the machine stop operation.
SPIN
To spin the separately washed laundry.
• If the water is left in the tub, it will drain before spinning.
• If the lid is opened, it will only drain without spin.
WASH
RINSE
To reuse the rinse water.
• After washing and rinsing, the rinse water is left in the tub and the machine stop operation.
WASH
SPIN
To wash with water (without detergent).
• The machine will spin automatically without rinsing after washing.
RINSE
SPIN
To rinse and spin the laundry soaked with detergent.
• If the water is left in the tub, it will drain and followed by the intermediate spin before start of rinsing.
•
In the case, when [Spin] or [Rinse] [Spin] is selected, if there is water in the tub, the machine will start from draining and if
there is no water in the tub, it will start from spinning. So it will take a little while before the machine start operating.
• IN THE CASE WHEN [Child Lock] MODE IS SET.
In some cases, if the lid is opened when the tub contains water, the machine will start force draining. In this case, cancel
the [Child Lock] mode.
Maintenance
To prevent fungus growth at the washing and spinning tub.
“Tub Hygiene” Course
NA-F70HR2_EN.indd 15
2/28/12 1:26:26 PM
