background image

8

“Economy’’ Laundering 

Using wash water twice 

Wash lightly soiled laundry in the first load. 

Wash heavily soiled laundry in 
the second load. 

1.  Put the laundry in the tub, and press [POWER ON]. 
2.  Press [PROCESS] button for [WASH] and press 

[START/HOLD] button. 

3.  Put in the detergent. 
4. Wash 

finishes. 

 

Take the wet laundry out. 

5. Load 

the 

laundry. 

6.  Press [POWER ON] to carry out 

washing, rinsing and spinning. Add the 
detergent a little when you increase the 
water level or refilling water. 

7.   Wash finishes. 

  

Remove the laundry. 

8.  Put wet laundry which has been washed back into 

the tub again. 

9.   Press [PROCESS] button for [RINSE] and  [SPIN], 

then press [START/HOLD]. 

10. Close the lid and wait until laundry will be completed. 

 

 

Laundry Tips  

Brush off laundry before washing 
them. 

Turn inside out any garments which 
give off lint or lint balls. 

Press down lightly on 
bulky items while the tub 
is filling with water to get 
them thoroughly soaked. 

Put a little detergent on a brush and 
lightly scrub the tough stains off 
collars and cuffs. 

Put laundry with lace attached, 
lingerie, nylon stockings, chemical 
fiber transparent fabrics etc. in a 
washing net. 

For laundry which has long cord or 
clasps attached, tie the cords on 
aprons, pillow covers and the like, 
and fasten clasps. 

POWDERED SYNTHETIC DETERGENT
[CONCENTRATED TYPE]
Color transfer and color fading will occur if the detergent directly 
in contact with the laundry (for a long time). Please use white 
handkerchief, etc. to wrap the detergent before put it into the tub.

How to use powdered synthetic detergents

How to dissolve

1.  Fill the washing machine tub with water one level below the water level that will be used. (For low 

water level setting, the same water level will be used.)

2.  Add the powdered detergent and let the machine run for about 3 minutes.
3.  Put the laundry in and begin washing at the desired level. Set the [WATER LEVEL] button.

Dissolving hard-to-dissolve detergent

1.  Pour 5 liters of water at about 30°C into a container.
2.  Dissolve the detergent by adding it little by little while churning the water.

 

 

In order to keep it from hardening or sticking, mix it well and dissolve it, then pour it into the washing tub.

[Warning]

  

Powdered detergent is not easily dissolved compared to synthetic detergent, be certain to rinse 
thoroughly. If it is not rinsed well laundry may be tinged with yellow or smell of detergent. If too much 
detergent is added, or if it is added directly to cold water, scum and clumps which are not completely 
dissolved will stick to the inside of the tub and hose. These may 

fl

 oat up and dirty the laundry.

How to use powdered detergent

NA-F62-70B1-ENABPS.indd   8

NA-F62-70B1-ENABPS.indd   8

5/8/08   9:16:32 AM

5/8/08   9:16:32 AM

Summary of Contents for NA-F70B1





















Reviews: