12.2 H-Error indication
● If there is an operation error or if there is a problem with the washing machine,
- All the switchs cannot be operated.
- An error indication will be displayed.
- 17 -
Indication
Content
Check Point
Method to clear
H01
Water level sensor
error
●Check at condition of the connector
●Disconnect the power
plug--->plug in
●Replace the Pressure sensor switch
●Replace PCB board
H02
Motor triac error
●In water drain action check both side of
●Disconnect the power
plug--->plug in
capacitor that voltage not equal to “0” V.
●Replace PCB board
H04
Load relay short
error
●After turn on the Motor for 2 seconds,
capacitor voltage is not “0”
●Change Capacitor
H05
The memory circuit
of IC error
●Replace PCB board
●Disconnect the power
plug--->plug in
H12
Safety switch
connection error
●Replace Safety switch
●Disconnect the power
plug--->plug in
H17
Thermistor error
(for X series)
●Replace PCB board
●Disconnect the power
plug--->plug in
H21
Overflow error
●Check Feed valve and PCB
●Disconnect the power
plug--->plug in
●Replace Feed valve