32
Error display
( When the error display comes on, a buzzer sounds and U
and a number appear alternatively.)
Unable to drain
What to do:
Check the drain hose, making sure
● it isn’t clogged up
● its tip isn’t immersed in water
● it doesn’t extend further than 3 metres
● the water isn’t frozen.
● Cleaning the drain filter
(see page 29)
Correct any
of these
problems, then
open the door,
shut it and start
the washing
machine again.
Door is open
What to do:
● Make sure the door is shut properly.
Unable to spin-dry
What to do:
● The laundry may be too heavy. If so,
unravel a tangle of items.
● The laundry may be too light. If so, add
one or two bath towels.
● One or more items may be too large,
such as blankets. If so, reduce the load.
● The washing machine may be on an
unstable or uneven surface.
Correct any
of these
problems, then
open the door,
shut it and start
the washing
machine again.
Unable to supply
water
What to do:
● Check the tap is open.
●
Check the water pipe or hose isn’t frozen.
● Check the water supply hasn’t been
disrupted.
● Check the water-supply valve filter isn’t
clogged. (see page 28)
Correct any
of these
problems, then
open the door,
shut it and start
the washing
machine again.
Drain filter is not set
What to do:
● Make sure the drain filter is set properly.
(see page 29)
● An error display starting with H doesn’t sound the buzzer.
Press the power OFF button. If the display stays on, or
it reappears when you press the START button, unplug
the washing machine and contact your nearest Customer
Service Centre.
