30
11.6. Motor
The washing machine has an asynchronous motor. It is
controlled by the PCB. It is essential to check the motor for
correct diagnosis and quick servicing. In the below picture,
socket points on the motor is shown to measure with
multimeter.
Motor
Motor socket terminals
Testing components
Tacho resistance control
Check the motor tacho terminals on the motor socket with
multimeter as shown in the picture above.
You can determine the ohm value by measuring from pink
and red cables on the large socket as shown in the figure
(referring X2 on the wiring diagram)
Stator Resistance Control
Check the motor stator terminals on the motor socket with
multimeter as shown in the picture.
You can determine the ohm value by measuring from black
and brown cables on the large (referring X2 on as shown in
right figure. For resistance values, refer to the table below.
Tacho and stator resistance values of motor:
MOTOR CODE SUPPLIER
STATOR (
Ω
)
TACHO (
Ω
)
TEMPERATURE
AXW401-23785 ANAIMEP
1.2 ± 7%
Ω
180 ± 7%
Ω
20
ºC
Tacho terminals
Strator Terminals
Summary of Contents for NA-147VC6WFR
Page 2: ...2 ...
Page 4: ...4 2 3 Dimension in millimetres NA 147VC6 ...
Page 5: ...5 3 Location of Controls and Components ...
Page 9: ...9 5 2 Program Details ...
