42
Checking after Installation
Appliance parts checklist
Installation place
□
●
Is the appliance on a flat, stable
surface?
●
Does it run without vibrating?
(P.39)
Drain hose
□
●
Is the drain hose properly
connected? Does it drain
normally? (P.41)
Adjustable feet
□
●
Are they stable and securely
tightened? (P.39)
●
Is the appliance level? (P.39)
Water supply hose
□
●
Is the water supply hose properly
connected? Is it free from leaks?
(P.41)
Anchor rods
●
Have you removed all 2 anchor
rods and fitted cover caps?
(P.38, 39)
Mains plug
□
●
Is the appliance plugged into an
AC 220 - 240 V household mains
socket? (see back cover)
Anchor rods (2)
Mains plug
Water supply hose
Do not remove the fastener of the
drain hose in the upper left.
Adjustable feet (4)
Drain hose
43
7
In
st
al
la
tio
n
Service
person
only
Test run
6
3, 7
7
4
5 10
8
9
1
Turn on the tap.
2
Close the door without any
laundry in the drum.
3
Switch on the appliance.
4
Select the “Quick 50”
programme.
5
Select
M
.
6
Start operation.
7
Switch the appliance off
and on.
8
Select
.
9
Press for about
5 seconds.
is displayed.
10
Press while
is
displayed to start test
run.
is displayed.
Operation finishes after about
3 minutes.
Water leaks
□
●
Check the appliance and hose
joints for leaks. (P.40)
Abnormal noise
□
●
Make sure the appliance is
level. (P.39)
Error display
□
●
After resolving an error, open
and close the door and press
“Start/Pause” to resume the test.
Unable to drain (P.36)
Unable to supply water
(P.36)
