Read Before Using - 9
Using the Buttons
10
11
9
Process indicator
9.
This indicator shows the current process
-
of the programme. The process consists
of wash , rinse
, spin , and drain
.
The light goes off when the wash is
-
finished.
Remaining time indicator
10.
This indicator shows the approximate
-
time until the washing finishes. For
example, ‘1:18’ means 1 hour and 18
minutes.
The time is acquired from the weight of
-
the laundry measured when washing
starts.
Steam indicator
11.
The Steam function becomes
operational when the Wrinkle-care,
Allergy-care, Shirts, Daily and Refresh
programmes are used. When you select
these programmes, the Steam symbol
lights up.
Moreover, during Wrinkle-care and
Refresh programmes, the Steam symbol
flashes on and off, indicating that Steam
operations are under way.
Unlocking the door
The door automatically locks while in use,
and the symbol is shown while the door
is locked. A click will be heard when the
door locks or unlocks.
Note
While the door is locked, if the
-
appliance is switched off, or if there
is a power interruption, the door
stays locked until the appliance is
turned on again.
This is different from the child safety
-
lock. (See page 23.)
Press the Start button to unlock the
door during operation.
After about 1 minute, the drum stops
spinning, and the door will automatically
unlock.
If the door doesn’t open, see page 27.
Caution
If you have to unlock the door
mid-programme, make sure that
water from the drum does not
overflow onto the floor.
Water and soap suds might come out
of the door and the door opening. You
may need a towel to soak them up.
NA-140VS4_English.indb 9
2012-12-27 13:12:08