36
Moving and Installing
(continued)
Removing the anchor bolts
The anchor bolts keep the interior of
the appliance in place, and protect it
from vibration during transportation.
Anchor
bolts
1
Loosen the 4 anchor bolts (4
pieces) using a spanner.
(Rear of appliance)
2
Turn the rubber part of each bolt
counterclockwise and pull it out.
3
Attach the cover cap to the hole. If
the caps are not attached, foreign
objects may enter the appliance
and cause a malfunction.
NOTE
z
Operating the appliance with
anchor bolts still attached will cause
excessive vibration. They must be
removed before operation.
z
Store the anchor bolts. They will
be needed when the appliance is
moved again in the future.
z
When moving the appliance again,
the anchor bolts must be attached
to the appliance. Attach the anchor
bolts in the reverse order they were
removed.
Levelling the appliance
Prepare a thin spanner and spirit
level. (not supplied)
Use a spirit level to make sure the
appliance is level.
Spirit level
Spirit level
1
3
2
1
Loosen the lock nut with the
spanner.
2
Turn the adjustable foot to adjust
the height.
3
Tighten the lock nut.
NOTE
z
Make sure that all lock nuts
are tightened securely and the
adjustable feet are still bolted to the
appliance.
If they are unbolted, the appliance
will shake and move around.
4 adjustable
feet
NA-128VG6_EN(HK).indd 36
2017-10-12 17:30:01
