32
Problem
Cause and Measures
Detergent and foam
Fabric softener
RYHUÀRZV
- The amount of softener used may have been above the
“MAX” line in the detergent drawer. (P. 12)
- The detergent drawer may have been closed too
strongly and spilt some of the softener.
There is powdered
detergent left on
the laundry after
washing
- Powdered detergent may have been put directly into
the drum.
It should be put into the detergent drawer. (P. 12)
Noise
There is an
unusual noise or
vibration
- There may be a metal item in the drum.
- The anchor bolts may not have been removed.
( P. 36)
- The appliance may be installed on a slope or an
unstable surface.
- Wet clothes may be loaded at the start of washing.
Perform spin process or wring out the laundry
beforehand.
There is noise
when water drains
out
- This is normal. It is the noise of the drain pump
working.
There is a fan
rotation sound.
- This is normal. The fan cools electric parts.
Others
There is a power
cut during
operation
- Operation will resume from the point it had stopped
when the power is recovered. (Auto restart)
The circuit breaker
trips during
operation
- Figure out the cause and deal with it, then reset the
breaker.
Operation will resume from the point it had stopped
when the power is recovered. (Auto restart)
The water supply
is disrupted
- After the water supply is restored, the water may be
discoloured for a short while.
Disconnect the water supply hose, run the tap until
the water is no longer discoloured, and reconnect the
water supply hose. (P. 38)
The display is
unclear
- The appliance may be in a brightly lit or sunlit area.
Troubleshooting
(continued)
NA-128VG6_EN(HK).indd 32
2017-10-12 17:29:56
