Panasonic NA-127MG2 Series, Operating Instructions Manual

Page: 25 / 31

10 2
4
• Make sure that valve cap and emergency drain hose are reinstalled properly, cap
plates should be inserted aligning to hole plates otherwise water may leak.
• Some machines don’t have emergency drain hose, so step 2 and step 3 can be skipped.
Rotate lower cover cap directly to make water run into basin.
• When the appliance is in use and depending on the program selected there can
be hot water in the pump
.
Never remove the pump cover during a wash cycle
,
always
wait until the appliance has finished the cycle and is empty
.
When replacing the
cover
,
ensure it is securely re-tightened
.
Cleaning The Drain Pump Filter
Be careful of the hot water!
Allow detergent solution to cool down.
•
•
• Unplug the machine to avoid electrical shock before washing.
• Drain pump filter can filter the yarns and small foreign matters from the
washing.
• Clean the filter periodically to ensure the normal operation of washing
machine.
Open the lower cover cap Rotate 90
°
and pull out
the emergency drain hose,
and take off the hose cap
Open the filter by turning
to the counter clockwise Remove extraneous matter
1 2 3
Close the lower cover cap
6 5 4
Emergency
drain hose
After water runs out,reset
the drain hose
Warning!
Caution!
MAINTENANCE