Panasonic NA-106VC, Operating Instructions & Installation Instructions

Page: 17 / 44

Read Before Using - 17
Using the Buttons and Dials
Start/Pause
Time
Time Saver
Child Lock
9 10
Process indicator 9.
This indicator shows the current process -
of the programme. The process consists
of wash , rinse , and spin .
The light turns off when the programme -
is finished.
Remaining time indicator 10.
This indicator shows the approximate -
time until the programme finishes. For
example, ‘200’ means 200 minutes.
Display on NA-106VC
Unlocking the door
The door automatically locks while in use,
and the symbol is shown in locked state.
A click will be heard when the door locks or
unlocks.
Note
If the appliance is switched off with -
the door locked, or if there is a power
interruption, the door will unlock after
1 or 2 minutes.
Press the Start/Pause button to unlock
the door during operation.
In the following cases, the door can’t be
unlocked even if operations are paused.
During spin-drying -
When the water level is beyond a certain -
level
Note
To unlock the door, set the -
programme selection dial to Off,
and then select a programme (ex.
Cotton).
Caution
If the door needs to be unlocked
mid-programme, make sure that
water from the drum does not
overflow onto the floor.
Water and soap suds may come out of
the door and the door opening. If so,
use a towel to soak them up.
2018-8-1 14:07:44