EN8
How to Use Blender
How to Use Scraper
ڦ
Use the Scraper when:
• The ingredients are hard to blend due to too little liquid. (For example: chili, curry dishes)
•
The ingredients stick to the side of the Blender Jug. (For example: garlic, leaves, crushed ice)
•
The ingredients stick to the bottom of the Blender Cutting Blade. (For example: crushed ice)
■
Note:
• Use the Scraper during blending only through the Blender Lid opening.
• Do not use the Scraper from other models for this product.
• Make sure the Inner Lid is attached when the Scraper is not used.
Turn off the appliance and remove the Inner Lid carefully.
Slowly slide the Scraper through the Blender Lid opening to perform operation. The Scraper can be inserted
through the Blender Lid opening while blending without interfering with the Blender Cutting Blade.
Crushed ice removal
Remove the crushed ice inside the Blender Jug.
Disassemble the Blender Jug Base (page
EN5
).
Use the Scraper to remove any crushed ice beneath the Blender Cutting Blade.
*Be careful with the Blender Cutting Blade.
1500
1000
500
Blender_MX-V310_300 (EVT).indb 8
Blender_MX-V310_300 (EVT).indb 8
11/28/2017 6:31:07 PM
11/28/2017 6:31:07 PM
