7
1
2
1
2
1
2
3
1
2
3
拆解攪拌機
拆解碾磨機
組裝攪拌機
組裝碾磨機
將攪拌機刀座逆時針方向旋轉取下。
將碾磨刀座逆時針方向旋轉取下。
將攪拌機容器順時針方向旋轉裝上
• 正確裝好墊圈，以使容器牢固、防止材料洩漏。
• 將攪拌杯組立放置於本體上後，請勿連接或取下容器，
否則馬達將不會運轉。
將碾磨刀座順時針方向旋轉裝上
• 正確裝好墊圈，以使容器牢固、防止材料洩漏。
碾磨刀座
碾磨機墊圈
To disassemble Blender
To disassemble Mill
To assemble Blender
To assemble Mill
mill container base
mill gasket
Turn blender container base
counterclockwise to disassemble.
Twist the mill container base
counterclockwise.
Twist the blender container base
clockwise.
• Make sure that the gasket is
positioned properly, and check
that the blender container base
is tightened securely to prevent
leakage.
• After mounting the blender
container base on the motor
housing, do not remove the
blender container. Otherwise, the
motor will not run.
Twist the mill container base clockwise to mount it.
• Make sure that the gasket is positioned properly, and
check that the mill container base is tightened securely
to prevent leakage.
0_MX-151SG1-050.indd 7
2010/05/24 11:31:13
