49
9 Service Position
Note: For description of the disassembly procedures, see the Section 8
9.1.
Checking & Repairing of Main
P.C.B. (Side A)
Step 1 :
Remove Top Speaker Ornament.
Step 2 :
Remove Bottom Case Unit.
Step 3 :
Gently peel off the Conductive Tape from the Bottom
Shield.
Step 4 :
Detach 2P Cable at the connector (CN1003) on the
Main P.C.B..
Caution 1: During assembling of the Bottom Shield, ensure
the 2P Cable are properly inserted into the Slot.
Caution 2: During assembling of the Bottom Shield, paste
the Conductive Tape back on the Bottom Shield, replace it
if torn.
Step 5 :
Remove 2 screws.
Summary of Contents for MW-20EB
