7
HOW TO USE
Wash all detachable parts and dry well before using the appliance for the first time, refer to page 8.
Unplug when assembling the unit. Before plugging in, ensure the Switch is switched to off.
Place the Container Unit
onto the Motor Housing.
Make sure the Spout
and the Clamps
positioned same
direction as illustrated.
Make sure the Container
Unit sits properly on the
Motor Housing.
1
1
Attach the Pulp
Container and make
sure it is fully
aligned with the
body.
2
Place the Spinner
in the Container
Unit and fix it into
position.
3
Place the Container
Cover onto the
Container Unit.
2
3
1
Push the Clamps
as shown until a
locking sound is
heard.
If the Clamps are
not clamped
correctly, the motor
will not operate.
4
Place the Juice Jug as
shown.
Make sure the Spout
is
in the downward
position when juicing.
Note:
*
The Spout can be
rotated freely for 120°
when the Spout is in the
upward position.
Note:
• Ingredients that are not recommended:
Soft fruits that produce puree and can clog the Spinner – e.g. bananas, peaches, apricots etc.
Low juice ingredients which can block the product – e.g. fresh basil leaf etc.
• Please remove hard seeds and stones from fruit before juicing such as guava etc. Hard seeds that difficult to remove
from such as pomegranate is prohibited for juicing.
•
During initial usage, the appliances might have some unpleasant smell (slight burn smell) but this condition is normal.
• Some ingredients may produce a lot of pulps accumulate to the Container Cover that cause operation stop.
(CIRCUIT BREAKER PROTECTION: refer to page 6)
• Make sure all parts are correctly mounted before you switch on the appliance.
• Please use the Juice Jug with the Cup Cover to avoid juice splashing. Make sure to align the Juice Jug opening
to the Spout when juicing.
• For model MJ-DJ01, speed 2 is suitable for hard type fruits e.g. apples, carrots etc. while speed 1 is suitable for
softer type fruits e.g. watermelons.
5
1
Plug in and switch on.
2
Insert the ingredients one
by one and push them
slowly
into the Feeding Tube
using the Food Pusher.
3
Align the Food Pusher into
the Feeding Tube as
illustrated.
6
After use, switch off and
unplug.
While removing the
Juice Jug, ensure
the Spout is pulled
up to prevent juice
from dripping.
Ensure the Spinner
is fully stopped
before release the
Clamps.
1000
1250
1500
mL
750
500
250
oz
fl
53
50
40
30
20
10
120°
1000
1250
1500
mL
750
500
250
oz
fl
53
50
40
30
20
10
1000
1250
1500
mL
750
500
250
oz
fl
53
50
40
30
20
10
1
2
3
Some pulp might be hard to collect in the Pulp
Container and stick on the Container Cover
depending on the ingredients and amount.
1
2
3
