6
DISASSEMBLY
CIRCUIT BREAKER PROTECTION
1
Lift up the Container
Cover and the Food
Pusher.
2
Detach the Pulp
Container.
1
Release the Clamps.
1
1
Lift up the Container
Unit.
1
Lift up the Spinner.
2
3
When the Circuit Breaker automatically stops the motor due to overloading, follow the directions
below.
1. Turn off the Switch to " 0 / O " position, (refer to Page 5).
2. Remove food residue from the Spinner and cut ingredients into smaller pieces.
3. Attach parts again (refer to Page 7) and resume operation. Push them gently into the Feeding Tube
using the Food Pusher.
2
Remove the Spinner
Pad.
1
Pull upper part
A
of the
Rotatable Container until
the hook part
B
is as
illustrated.
2
Press the hook part
B
as
illustrated and pull upwards
to detach it.
3
To attach the Container Unit
again by reversing steps
1
to
2
.
Note: If difficult to wash the Container Unit, it can be detached.
A
B
