16
D-5
D-6
D-7
D-8
D - MAINTENANCE AND SERVICING
Power nozzle care
Always follow all safety precautions before performing
maintenance to the power nozzle.
WARNING
• Electrical Shock or Personal Injury Hazard.
• Disconnect the electrical supply before performing
maintenance to the vacuum cleaner. Failure to do
so could result in electrical shock or personal injury
from vacuum cleaner suddenly starting.
Inspect once a month.
D-5
Unscrew the two agitator cover screws on the bottom of
the power nozzle.
D-6
To remove the power nozzle cover, grasp the side
latches and pull out first.
Then grasp the rear latches and pull out.
D-7
Lift agitator assembly out and remove the belt.
Using an old tooth brush or similar tool, clean any dirt or
lint from the brush.
D-8
Then cut across threads, strings, hairs, etc. from the
beater bar with a pair of scissors.
(Removal as per reverse procedure)
NOTE:
Take care not to cut the brush. Do not wash in water.
MC-CG880(V01Z5L00U)̲0818.indd 16
MC-CG880(V01Z5L00U)̲0818.indd 16
2008/08/19 18:41:53
2008/08/19 18:41:53
