Panasonic MC-YL669 Operating Instructions Manual Download Page 2

2

In order to prevent the risk of danger to the user of this product or those nearby and damaging property, be 
sure to follow the safety precautions outlined below.

•   The following terms are used for precautions. They are separated depending on the degree of the danger or damage 

that may occur if their contents are ignored while using this product.

IMPORTANT SAFETY INSTRUCTIONS FOR THE USER

 

Do not leave the appliance plugged into the socket outlet. The Plug must be removed from the socket outlet 
before cleaning or maintaining the appliance. If not, it may cause an electric shock.

 

This appliance is not intended for use by persons (including children) with reduced physical, sensory or 
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or 
instruction concerning use of the appliance by a person responsible for their safety. Children should be 
supervised to ensure that they do not play with the appliance. If not, it may cause an electric shock, fi re or 
injury.

 

Do not use the product if the Supply Cord or Plug is damaged. If the appliance is not working as it should be 
or has been dropped, damaged, left outdoors or come into contact with water, please consult an authorised 
Service Centre. If not, it may cause an electric shock or fi re.

 

If the Supply Cord is damaged, it must be replaced by the manufacturer, its service agent or similarly 
qualifi ed persons in order to avoid a hazard.

 

Do not pull or carry by the Supply Cord, do not use Supply Cord as a handle, do not close a door on the 
Supply Cord and do not pull Supply Cord around sharp edges or corners. Do not run appliance over the 
Supply Cord. Keep the Supply Cord away from heated surfaces. If not, it may cause fi re.

 

Be sure the Plug is fi rmly insert into socket outlet before operating the appliance. If not, it may cause an 
electric shock or fi re.

 

Clean the Plug regularly. If not, it may cause an electric shock or fi re.

 

Discontinue using the appliance immediately and unplug the Plug in cases of abnormal situations and 
breaking down. If not, it may cause an electric shock or fi re.

 

Do not handle Plug or appliance with wet hands. If not, it may cause an electric shock.

 

Do not insert any object into the openings and do not use the appliance when it is choked (VAC gauge turn 
red). Keep it free from dust, lint, hair and anything that may block or reduce air fl ow.

 

Keep hair, loose clothing, fi ngers and all parts of body away from the openings and moving parts. If not, it 
may cause an electric shock.

 

Do not use the appliance without Filter and Expander. If not, it may cause an electric shock or fi re.

 

Turn off the appliance before unplugging. If not, it may cause an electric shock.

 

Do not use to pick up fl ammable or combustible materials or other that may become so or use in areas where 
they may be present. If not, it may cause an electric shock or fi re.

 

This appliance should be serviced by an authorised Service Centre and only genuine spare parts should be 
used. If not, it may cause fi re or result in improper operation.

 

Use the appliance under the allowable rated voltage conditions. If not, it may cause an electric shock or fi re.

 

Do not use extension cord. If not, it may cause an electric shock or fi re.

This term warns you that death or serious injury 
may result by incorrect operation of the product.

WARNING

 

To avoid any possible damage to the Supply Cord, never allow it to be placed under a 
heavy object when using the appliance. It may cause fi re.

 

This appliance is designed with a Supply Cord rewind function.
To ensure safety, please always hold the Plug when winding up the Supply Cord. If 
not, may cause an accident by being hit by the Plug.

 

Never hold the Metal Extension Wand while using the blower function. Hot air from 
the Blower may heat up the Metal Extension Wand.

This term cautions you that injury or physical damage to 
property may result by incorrect operation of the product.

CAUTION

Summary of Contents for MC-YL669

















Reviews: