Panasonic MC-UL815, Operating Instructions Manual

Page: 46 / 68

- 46 -
If the vacuum cleaner does not seem to
have adequate suction, first check if the
dust bin is full or if a filter is clogged.
➢
Turn off and unplug the vacuum
cleaner.
➢
Remove dust bin and check for
clogs.
➢
Check the extension hose area.
➢
Visually inspect the tools, the hose,
and the hose holder area into which
the hose is connected.
➢
Remove any visible clog.
➢
Plug in the vacuum cleaner and turn
it on.
➢
Stretch the hose to maximum length
and then allow the hose to return to
its storage length.
➢
If the dust bin and filter areas and the
hose areas are free of clogs, check
the nozzle area.
➢
Press tab and remove hose cover.
➢
Remove nozzle hose from hose
holder by pressing locking tabs and
pulling down on the nozzle hose (it
may be necessary to slightly twist the
nozzle hose to loosen from the hose
holder).
➢
Inspect inlet of nozzle hose and clear
any obstructions.
➢
Replace nozzle hose and hose cover.
➢
Return the vacuum cleaner to the
upright position before plugging into
an electrical outlet.
Removing Clogs
Hose
Tuyau
Manguera
Hose Holder
Porte-tuyau
Soporte de la
manguera
Tab
Languette
Pestaña
Hose Cover
Cubierta de
manguera
Couvercle
du tuyau
Nozzle Hose
Tuyau court
Manguera de
la boquilla
Hose Holder
Porte-tuyau
Soporte de
la manguera
Hose
Tuyau
Manguera