12
6. Release the Tab Portion with a flathead screwdriver and
lift straight up, then remove the Nozzle Holder Unit.
*When assembling the Terminal Plate, be careful that
the protrusion at the Terminal Plate (at 2 positions)
does not ride up on the Boss of the Nozzle Holder
Unit.
4.4.
Removal of the Switches
1. Refer to the "Disassembly of the Body" page and disas-
semble the Body.
2. Refer to the "Replacement of the Fan Motor Unit" page
and remove the motor related parts.
3. Refer to the "Removal of the Nozzle Holder Unit" page
and remove the Nozzle Holder Unit.
4. Remove the switches from the Switch Fitting Plate.
5. Remove the Faston terminals of the switches.
*Hold down the lock and remove.
*After attaching the Faston terminal, wrap with
Gasket V.
