14
• Before servicing any parts, unplug the mains lead from electrical outlet.
• Always place paper under nozzle whenever lower plate is removed to
protect the floor.
• Place body in upright position and turn vacuum cleaner over to expose
lower plate.
• Release lower plate by rotating the lower plate latches to the UNLOCK
position.
• Remove lower plate and remove any residue that may exist in belt area.
• Reinstall lower plate by hooking front end of lower plate into slots on front
of nozzle.
• Press lower plate onto nozzle and secure by rotating the lower plate
latches to the LOCK position.
THERMAL PROTECTOR
• This vacuum cleaner has a thermal protector which automatically trips to protect the vacuum cleaner from overheating.
• If a clog prevents the normal flow of air to the motor, the thermal protector trips and turns the motor off automatically.
This allows the motor to cool in order to prevent possible damage to the vacuum cleaner.
TO CORRECT PROBLEMS:
• Turn the vacuum cleaner off and unplug the power cord from the outlet to allow the vacuum cleaner to cool and the thermal
protector to reset automatically.
• Check for and remove clogs, if necessary. Also check and replace any clogged filters and empty dust bin if necessary.
• Wait approximately sixty (60) minutes and plug the vacuum cleaner in and turn back on to see if the motor protector has reset.
REMOVING AND INSTALLING LOWER PLATE
Latches
Lower Plate
Lower Plate
WARNING
Electrical Shock or Personal Injury Hazard
Disconnect the electrical supply before servicing or cleaning the vacuum cleaner.
Failure to do so could result in electrical shock or personal injury from vacuum cleaner suddenly starting.
• Replace the belt if excessive slipping occurs.
• Remove lower plate. See “Removing and Installing Lower Plate”.
• Remove beater bar by gripping the belt side of the beater bar carefully
lifting out as shown.
• Remove worn or broken belt.
• Clean beater bar and the end caps.
REPLACING BELT
Motor Shaft
Beater Bar
Belt Groove
End Cap
Belt
Beater Bar
Motor Shaft
Latches
