11
• To reassemble, put the hinge of the dust bin plate to its original location
as shown.
• Slide the lid holding bracket to its original location as shown and push
until you hear a “click” sound.
NOTE:
• Push the lid holding bracket using both palm if the lid holding bracket is
difficult to push in.
• Place dust bin back into vacuum cleaner by inserting the bottom first and
tilting back.
• Push forward and lower dust bin handle to lock dust bin in place.
• A lid holding bracket is located on the hinge area of the dust bin.
• This bracket may release in order to prevent damage to the dust bin or
the dust bin plate due to the dust bin was dropped or the dust bin plate
getting any impact.
Lid Holding
Bracket
NOTE:
Hinge
• Clean up outer dust bin with clean, soft cloth that has been dipped in
water and wrung dry.
