Panasonic MC-UG223, Operating Instructions Manual

Page: 30 / 48

- 30 -
+
Cleaning Agitator
+
End Cap
Bouchon
Tapa del extremo
Groove
Ranura
Ouverture
Replacing Belt
Agitator
Agitateur
Agitador
Belt
Courroie
Correa
Motor Shaft
Arbre d’entraînment
du moteur
Eje del motor
➢
Remove worn or broken belt.
➢
Loop new belt (Panasonic Type UB8
only) around motor shaft and belt
pulley; see illustration for correct
belt routing.
➢
Reinstall agitator back into nozzle
housing grooves.
➢
After reinstalling the agitator, turn it
by hand to make sure that belt is not
twisted or pinched and that all
rotating parts turn freely.
➢
Reinstall lower plate.
➢
Clean agitator after every five uses
and every time the belt is replaced
.
➢
Remove lower plate .
➢
Cut off any carpet pile and lint
entangled around agitator with a pair
of scissors
.
➢
Remove agitator .
➢
Remove any string or debris located
on the end caps.
➢
Reinstall agitator and lower plate .