Assembly
Cleaning
Click
Click
EN15
ENGLISH
●
If the dust box is not securely set in, it
will not suck in the debris .
●
Install in the reverse sequence
of disassembly
1
Set the pleat filter inside as per
the illustration
2
Set the net filter in the dust
cup and attach the dust box to
the main unit
1
Remove while
pressing the net filter’s
tabs
Net filter
②
Dust cup
Tab
1
①
Immerse it in water
(about 30 minutes)
Wash it with running water
(Do not rub with a brush, etc.)
If hair, etc. is entangled around it and the debris
cannot be removed, then clean it out (dust box).
Net filter
Firmly press until you hear a
“click”
●
If it is hard to get the debris to
come out, vibrate the dust cup
by lightly tapping on it, etc.
It can also be washed with water
when you are concerned about grime
(Dry it sufficiently then put it back in)
Wash
in water
●
Do not use detergent, benzine, thinner, alcohol, etc.
(May lead to cracks and discoloration)
●
Leave it in a well-ventilated place for about 24 hours, and let it
thoroughly dry.
(Not doing so can cause it to smell and get clogged up)
●
Do not expose to hot airflow from a hairdryer and the like.
(May lead to deformation and failure)
Request
Request
Pleat filter
2
Clear out the debris
3
Set the dust box
2
Large garbage bag etc.
2
Throw away the trash and dust to clean out
Cleaning brush
Summary of Contents for MC-SB53K
Page 2: ...ENGLISH EN 正體 HK BAHASA MELAYU MA TIẾNG VIỆT VI ...
Page 83: ......
