4
A)
Floor nozzle
B)
Connection pipe
C)
Hose
D)
Manual suction control
E)
Curved wand
F)
Extension wand
G)
Wand holder
H)
Dust bag check indicator
I)
Dust cover
J)
Suction inlet
K)
ON /OFF Switch pedal
L)
Cord rewind pedal
M)
Exhaust cover
N)
Plug
O)
Accessories
P)
Crevice tool
For vacuuming in inaccessible places like a window
frame or a crevice in the wall.
Q)
Dusting brush
For vacuuming pictures frames, furnitures, books and
other objects.
B-1
Insert connection pipe into the suction inlet until it locks.
When removing hose assembly, pull out connection
pipe with pushing down two connection buttons.
NOTE:
Do not bend, pull and step on the hose or put
anything heavy on it.
B-2
Connect the two extension wands by inserting one into
the other and twisting together.
B-3
Insert the hose unit into the upper end of the connected
extension wand, and the floor nozzle to the other end.
C-1
Pull out the mains lead and put the plug into the
socket outlet.
C-2
Gently press at the centre of the switch pedal to
turn ON the vacuum cleaner.
Press the pedal again to turn it OFF.
C-3
Switching between carpet and flooring
Flooring: Press lever A
Carpet: Press lever B
C-4
The curved wand of the hose is attached with a manual
suction control,which allows you to briefly reduce the
suction level.
C-5
After you finish vacuuming, remove the plug from
the socket outlet and press the cord rewind pedal.
When rewinding the mains lead, press the cord rewind
pedal by holding the plug so that it does not become
damaged.
C-6
Storage position
Insert the wand holder straight into the wand
supporter.
NOTE:
When storing the vacuum cleaner upright, be
careful of plug and cleaning tools not to
scratch the floor surface.
C-7
Park system
For short breaks during vacuuming, slide the hook
attached to the nozzle pipe into the slot on the rear
side of the cleaner.
NOTE:
When you use park position, we suggest the
appliance is switched off.
A - IDENTIFICATION OF MAIN PARTS
B - HOW TO ASSEMBLE YOUR CLEANER
C - HOW TO OPERATE YOUR CLEANER
