9
* For removing the printed circuit board AU on the
CG461, first remove the fast-on terminal for the con-
necting section for the motor.
4.4.
Motor removal
1. Remove the dust box lid assembly. (Refer to paragraph
4.1 on P.6)
2. Remove the upper body from the lower body. (Refer to
paragraph 4.2 on P.6)
3. Remove the printed circuit board AU. (Refer to paragraph
4.3 on P.7)
4. Remove the two screws fixing the printed circuit board
holder and pull it out from the lower body.
5. Lift the motor set section from the lower body U.
* CG467,CG465,CG463
* CG461
Summary of Contents for MC-CG461
Page 3: ...3 2 Location of Controls and Components ...
Page 4: ...4 ...
