－
5
－
－
4
－
CAUTION
Do not subject the brushless amplifier, motor
or shaft to high impact.
The failure could result in malfunction.
If trip occurs, remove the causes of the trip and
secure the safety before restarting.
The failure could result in injuries.
Execute the trial-operations with the motor fixed
and a load unconnected. Connect a load to the
motor after the successful trial-operations.
The failure could result in injuries.
Use the specified voltage on the product.
The failure could result
in electric shocks, injuries, or fire.
Install a safety device against idling or locking
of gear head, and leakage of grease.
The failure could result in injuries,
damages, and contaminations.
Do not modify, dismantle or repair the product.
The failure could result
in electric shocks, injuries, or fire.
Do not block the heat dissipation hole.
The failure could result
in electric shocks, or fire.
Maintenance and check must be performed by
an expert.
The failure could result
in injuries and electric shock.
Conduct proper installation according to
product weight or rated output.
The failure could result
in injuries, or damages.
Use the motor and amplifier with the specified
combination.
The failure could result in fire.
Ambient temperature of installed motor and
amplifier should be under permittable one.
The failure could result in damages.
This product should be treated as an industrial
waste when it is disposed.
Be sure to turn off power when not using it for
a prolonged time.
The failure could result in injuries due
to unintentional operation.
Introduction/ Checking the model
After unpacking
• Make sure that the model is what you have ordered.
• Check whether the product has been damaged or not during transportation.
If any deficiency should be found,
contact the dealer store where you bought this product.
Checking the model of Amplifier, Motor and Gear head
This amplifier is designed for use in combination with a motor to be specified by us.
Check a name of series, rated output, voltage specifications you wish to use
You must not use any other combinations than those listed below:
Standard
Shaft
type
Voltage
Out put
Amplifier
Type
Applicable
Motor
Applicable Gear head
GV series
Pinion shaft
Single phase
AC100 to 120 V
50 W MBEG5A1BCV
MBMU5AZAX
MX8G
□
B *
Reduction ratio: 3 to 180
90 W MBEG9A1BCV
MBMU9A1AZ
MZ9G
□
B *
MY9G
□
B *
Reduction ratio: 3 to 200
130 W MBEG1E1BCV
MBMU1E1AZ
Single phase/
3-phase
AC200 to 240 V
50 W MBEG5A5BCV
MBMU5AZAX
MX8G
□
B *
Reduction ratio: 3 to 180
90 W MBEG9A5BCV
MBMU9A2AZ
MZ9G
□
B *
MY9G
□
B *
Reduction ratio: 3 to 200
130 W MBEG1E5BCV
MBMU1E2AZ
Round shaft
Single phase
AC100 to 120 V
50 W MBEG5A1BCV
MBMU5AZAS
—
90 W MBEG9A1BCV
MBMU9A1AS
130 W MBEG1E1BCV
MBMU1E1AS
Single phase/
3-phase
AC200 to 240 V
50 W MBEG5A5BCV
MBMU5AZAS
90 W MBEG9A5BCV
MBMU9A2AS
130 W MBEG1E5BCV
MBMU1E2AS
GP
series
Pinion shaft
Single phase
AC100 to 120 V
50 W MBEG5A1BCP
MBMU5AZAB
MB8G
□
BV *
Reduction ratio: 5 to 50
90 W MBEG9A1BCP
MBMU9A1AB
MB9G
□
BV *
Reduction ratio: 5 to 50
130 W MBEG1E1BCP
MBMU1E1AB
Single phase/
3-phase
AC200 to 240 V
50 W MBEG5A5BCP
MBMU5AZAB
MB8G
□
BV *
Reduction ratio: 5 to 50
90 W MBEG9A5BCP
MBMU9A2AB
MB9G
□
BV *
Reduction ratio: 5 to 50
130 W MBEG1E5BCP
MBMU1E2AB
* A figure representing reduction ration in
□
e.g.) Part number of MX type gear head with reduction ratio 10 is MX8G10B.
Safety Precautions
Important
Do not frequently turn on and off the master
power source.
The failure could result in malfunction.
Do not place any obstacle that blocks ventilation
around the brushless amplifier and the motor.
The failure could result in burns or fire.
