8
VQT4G28
Names and Functions of
Components
1
Lens surface
2
Focus ring
Rotate to focus when taking pictures with manual
focus.
3
Zoom ring
Rotate the zoom ring when you wish to take large
(tele) or wide (wide angle) pictures. (35 mm film
camera equivalent: 24 mm to 70 mm)
4
[O.I.S.] switch
When the lens is attached to the camera the
stabilizer function is set to activate if the [O.I.S.]
switch is set to [ON].
≥
We recommend setting the [O.I.S.] switch to [OFF]
when using a tripod.
≥
The stabilizer function may not be effective in the
following cases.
– When there is a lot of jitter.
– When the zoom magnification is high.
– When using the digital zoom.
– When taking pictures while following a moving subject.
– When the shutter speed becomes slower to take
pictures indoors or in dark places.
5
Contact points
6
Lens fitting mark
7
Lens mount rubber
Note
≥
When flash recording with a close subject, the
light of the flash will be blocked by the lens and
part of the picture may be dark. Check the
distance from the subject when recording.
≥
When recording on the wide-angle side and using
the flash, the periphery of the screen may darken. In
such cases, we recommend using the external flash.
≥
If you zoom after focusing, focusing errors may occur.
After zooming, please perform the focusing again.
5 6
4
2
3
1
7
VQT4G28_ENG_SPA.book 8 ページ ２０１２年５月１６日 水曜日 午前１１時４３分
