9
VQT5B49
– Where water may make the unit wet
– Where there is vibration
– Inside a vehicle
≥
Refer also to the operating instructions of the
digital camera.
≥
When the unit is not going to be used for a
prolonged period, we recommend storing with a
desiccant (silica gel). Failure to do so may result in
performance failure caused by mold, etc. It is
recommended that you check the unit’s operation
prior to use.
≥
Do not leave the lens in contact with rubber or
plastic products for extended periods of time.
≥
Do not touch the lens contact point. Doing so can
cause failure of the unit.
≥
Do not disassemble or alter the unit.
Do not use benzine, thinner, alcohol or other
similar cleaning agents to clean the lens glass or
exterior cabinet.
≥
Using solvents can damage the lens or cause the
paint to peel.
≥
Wipe off any dust or fingerprints with a soft, dry cloth.
≥
Use a dry, dust cloth to remove dirt and dust on
the focus ring.
≥
Do not use a household detergent or a chemically
treated cloth.
A sound is heard when the camera is turned on
or off.
A sound is heard from the lens when taking a
picture of a bright subject such as when
outdoors.
≥
This is the sound of lens or aperture movement
and is not a malfunction.
Troubleshooting
VQT5B49_E.book 9 ページ ２０１３年５月３１日 金曜日 午後４時５４分
